Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 412)

d Transferring Images to a Computer
412
Sel.Image
1
Select [Image transfer].
Under the [ 3 2 ] tab, select [ Image
transfer ], then press < 0 >.
2
Select [Image sel./transfer].
3
Select [Sel.Image].
4
Select the images to be
transferred.
Turn the < 5 > dial to select the
image to be transferred, then press
<
0 >.
Turn the < 5 > dial to display the [ X ]
on the screen’s upper left, then press
<
0 >.
If you press the < u > button and turn
the < 6 > dial counterclockwise, you
can select an image from a three-image
display. To return to the single-image
display, turn the <
6 > dial clockwise.
To select another image to be
transferred, repeat step 4.
3 Selecting the Images to be Transferred
When [ Sel.Image ] is selected, you can check the image’s transfer status
on the upper left of the screen: No mark: Not selected. X : Selected for
transfer. l : Transfer failed. k : Transfer succeeded.
The procedures for [ RAW+JPEG transfer ] (p.411) and steps 1 to 4 above
can also be performed while the camera is not connected to a computer.