Canon EOS-1D X Mark II DSLR Camera (Body Only) User Manual
Page 453
453
7
Custom Controls
If the metering timer is active, you can select an AF point directly with
the <
5
> or <
9
> dial without pressing the <
S
> button.
*5: With the Quick Control Dial setting screen
displayed, you can press the <
B
> button, then
set the direction for switching the AF point for when
the <
5
> dial is turned. The [
Direction: AF point
switching
] settings for [
Horizontal
] and [
Vertical
]
will work for Single-point Spot AF, Single-point AF,
Man. select.: AF point expansion, and Expand AF
area: Surround. The [
Direction: Zone AF frame
switch
] settings for [
Cycle through the zones
],
[
Horizontal
], and [
Vertical
] will work with Zone AF.
*6: On the Multi-controller setting screen, press the <
B
> button and you can select
the AF point ([
Switch to center AF point
] or [
Switch to registered AF point
]) the
camera will switches to when you press the center of <
9
>. To register the AF point,
see page 450.
If the metering timer is active, you can select an AF point directly with
<
5
> without pressing the <
S
> button. When this function is set, the
functions of the <
O
> and <
S
> buttons will be switched between them.
By holding down the <
S
> button and turning the <
6
> dial, you can
set the exposure compensation or aperture.
*7: With the setting screen displayed, you can press the <
B
> button, then set the
direction for switching the AF point for when the <
5
> dial is turned. The [
Direction:
AF point switching
] settings for [
Horizontal
] and [
Vertical
] will work for Single-point
Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area:
Surround. The [
Direction: Zone AF frame switch
] settings for [
Cycle through the
zones
], [
Horizontal
], and [
Vertical
] will work with Zone AF.
: Direct AF point selection
: Select AF point
O
z
S
( during metering)