Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 225)

225
Logging the Route Traveled
The log data in the camera’s internal memory can be downloaded to a
computer with EOS Utility (EOS software, p.552) or downloaded from a
card after transferring the data to the card.
When you use Map Utility (EOS software, p.552) to open a log file
saved on the computer, the camera’s travel route will be displayed on a
map.
Importing the log data using EOS software
With the camera connected to a computer via the provided interface
cable, you can download the log data to the computer with EOS Utility
(EOS software). For details, refer to the EOS Utility Instruction Manual
(p.554).
Transferring the log data to a card for downloading
When [ Transfer log data to card ] is
selected, you can transfer the log
data in the internal memory as log
files to a CF card [
f ] or CFast card
[ g ].
Note that when log files are
transferred to a card, that log data is
erased from the camera’s internal
memory.
The log files imported to the card will be stored in the “GPS” folder in
the “MISC” folder. The extension is “.LOG”.
Selecting [ Delete log data ] will erase the log data saved in the
internal memory. Erasing the data may take approx. one minute.
Downloading Log Data to a Computer