Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 444)

3 Custom Function Settings
444
Retract lens on power off C.Fn7
This is to set the lens retraction mechanism for when a gear-driven STM lens (such
as EF40mm f/2.8 STM) is attached to the camera. You can set it to retract the
extended lens automatically when the camera’s power switch is set to <
2 >.
ON : Enable
OFF : Disable
Add IPTC information C.Fn7
With the IPTC (International Press Telecommunications Council) information from
EOS Utility (EOS software, p.552) registered to the camera, the IPTC information
can be recorded (appended) to the still photos (JPEG/RAW images) you shoot.
Useful for file management and other tasks utilizing the IPTC information.
Regarding the procedure to register the IPTC information to the camera and details
on registered information, refer to the EOS Utility Instruction Manual
(p.554) .
OFF: Disable
The IPTC information will not be recorded to the image.
ON: Enable
During still photo shooting, the IPTC information registered in the
camera will be recorded to the image.
With auto power off, the lens will not retract regardless of the setting.
Before detaching the lens, make sure that it is retracted.
When [ Enable ] is set, this function takes effect regardless of the lens’s
focus mode switch setting (AF or MF).
The IPTC information is not appended during movie shooting (MOV or MP4 movies).
During playback, you can check whether the IPTC information is
appended or not (p.349).
With Digital Photo Professional (EOS software, p.552), you can check
the IPTC information recorded in the image.
Even if [ 8 8: Clear all Custom Func. (C.Fn) ] is selected (p.422), the
IPTC information registered in the camera will not be erased. However,
the setting will be [
Disable ].