Canon EOS-1D X Mark II DSLR Camera (Body Only) User Manual

Page 51

Text mode
Original mode

Installing and Removing the Card

Open the cover.

Set the power switch to <

Check that the access lamp is off,
then open the cover.

If [

Recording...

] is displayed on the

LCD monitor, close the cover.

Remove the card.

Push the eject button to eject the
card.

Pull the card straight out, then close
the cover.

Removing the Card

Access lamp

Caution

During Live View shooting or movie shooting, if the red icon

appears,

do not remove the card right away.

The card may be hot due to the

camera’s high internal temperature. Set the power switch to <

> and stop

shooting for a while. Then remove the card. If you take out the card while it is
still hot after shooting, you may drop the card and damage it. Be careful when
taking out the card.