Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 211)

211
4
GPS Settings
This chapter explains the camera’s built-in GPS
settings. The EOS-1D X Mark II (G) can receive satellite
navigation signals from GPS satellites (USA),
GLONASS satellites (Russia), and the Quasi-Zenith
Satellite System (QZSS) “Michibiki” (Japan).
The GPS function is set to [ Disable ] by default.
This manual uses the term “GPS” to refer to the satellite
navigation function.
When [ GPS ] is set to [ Mode 1 ] (p.215) , the camera will
continue to receive GPS signals at regular intervals
even after the camera’s power switch is set to < 2 >.
The battery will thereby drain faster and the number of
possible shots will decrease. If you will not use GPS,
setting [ GPS ] to [ Disable ] or [ Mode 2 ] is recommended.
When using GPS function, be sure to check the region of use and
use the function in accordance with the laws and regulations of
the country or region. Be particularly careful when using GPS
outside your home country.