Canon EOS-1D X Mark II DSLR Camera (Body Only) User Manual
Page 314
3
Setting the Movie Recording Quality
314
For 4K movie shooting, [
z
2: High ISO speed NR
] will not take effect.
Therefore, noise may be more noticeable depending on the shooting
conditions.
If you change the [
5
3: Video system
] setting, also set the movie-
recording size again.
Movies shot in 4K, at a high frame rate, or in
L8
/
7
may not be
played back properly on other devices due to the heavy data processing
load during playback.
Movies may look different in quality and noise depending on the frame
rate setting even if both are in Full HD.
A movie shot in
H
8
/
7
will be played back on the LCD monitor at a
different frame rate from the frame rate of the movie shot.
The frame rate displayed on the movie recording size screen switches
depending on whether [
5
3: Video system
] is set to [
For NTSC
] or [
For
PAL
].
The camera cannot shoot High Definition (HD) and Standard Definition
(VGA) movies.
If you change the movie size from Full HD to 4K, the image area of the
movie shooting will be slightly shifted to the telephoto end.
The 4K movie coverage is different from that of the EOS-1D C.
The color sampling recorded will be as follows: 4K: YCbCr 4:2:2(8-bit),
Full HD: YCbCr4:2:0 (8-bit). The color matrix will be as follows: 4K: Rec.
ITU-R BT.601, Full HD: Rec. ITU-R BT.709.