Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 433)

433
3 Custom Function Settings
C.Fn4: Drive
Continuous shooting speed C.Fn4
You can set the continuous shooting speed for < o > High-speed
continuous shooting, < p > Low-speed continuous shooting, < 6o >
Silent high-speed continuous shooting, and < 6p > Silent low-speed
continuous shooting. Then select [ OK ] to register the setting.
High speed
The default setting is 14 fps. For viewfinder shooting, you can set 2
fps to 14 fps. For Live View shooting, you can set 2 fps to 14 fps or
16 fps. The “(16)” indicates the continuous shooting speed for Live
View shooting.
Low speed
The default setting is 3 fps. You can set it from 1 to 13 fps.
Silent HS continuous
The default setting is 5 fps. You can set it from 2 to 5 fps.
Silent LS continuous
The default setting is 3 fps. You can set it from 1 to 4 fps.
For viewfinder shooting, if the ISO speed is H1 (equivalent to ISO
102400) or higher (ISO 32000 or higher if the camera’s internal
temperature is low), the maximum continuous shooting speed will be
approx. 10.0 fps even if [
High speed ] is set to [ 14 (16) fps ] - [ 11 fps ] or
[ Low speed ] is set to [ 13 fps ] - [ 11 fps ]. (With AC Adapter Kit ACK-E4,
the maximum continuous shooting speed will be approx. 8.0 fps
regardless of the ISO speed (p.148).)
For Live View shooting, if the ISO speed is H1 (equivalent to ISO
102400) or higher (ISO 32000 or higher if the camera’s internal
temperature is low), the maximum continuous shooting speed will be
approx. 14.0 fps even if [
High speed ] is set to [ 14 (16) fps ]. (With ACK-
E4, the maximum continuous shooting speed will be approx. 14.0 fps
regardless of the ISO speed. (p.148).)
If you use a Speedlite with Live View shooting and set [ High speed ] to [ 14
(16) fps ], the flash will not be fired during high-speed continuous shooting.
If [ z 3: Anti-flicker shoot. ] is set to [ Enable ] (p.198), you may not be
able to shoot at the continuous shooting speed you have set.