Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 229)

229
d : Program AE
Using Single Silent (p.147), mirror lockup (p.256), or Silent LV
shooting (p.281) is effective.
For continuous shooting, using Silent HS continuous or Silent LS
continuous is effective (p.147).
Use a sturdy tripod that can bear the weight of the shooting
equipment. Mount the camera securely on the tripod.
Using a remote switch is recommended (p.258).
Minimizing Blurred Photos
If the “ 30" ” shutter speed and the lowest f/
number blink, it indicates underexposure.
Increase the ISO speed or use flash.
If the “ 8000 ” shutter speed and the highest f/
number blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering
the lens.
Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (Program) set automatically by the camera while
maintaining the same exposure. This is called Program shift.
To shift the program, press the shutter button halfway, then turn the
<
6 > dial until the desired shutter speed or aperture is displayed.
Program shift will be canceled automatically when the metering timer
(
9 ) ends (exposure setting display turns off).
Program shift cannot be used with flash.