Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 523)

523
3 System Status Display
4
Check the system status.
Turn the < 5 > dial to select an Error
or Caution, then press the < B >
button to view the message.
Turn the < 5 > dial to check the
message.
Caution Messages
The camera checks its important components to see if they are
operating properly. If it detects an operation that is inaccurate but not
serious enough to be an error, it will be recorded as a Caution message
in the Camera status log. Although you can continue shooting, follow
the recommendations in the Caution message and solution since the
condition may lead to a malfunction.
Caution
Number
Messages Description and Solution
01
Shutter speed repeatedly
adjusted automatically.
You may continue
shooting but contacting a
service center is
recommended. If the camera detects an error in the shutter
speed, it will make adjustments to maintain
shutter speed precision. If this adjustment is made
repeatedly, this Caution message will appear.
You can continue shooting, but consulting your
nearest Canon Service Center is recommended.
02
A sudden drop in battery
performance was
detected. If this happens
again after battery
replacement, contact a
service center. While the camera is turned off, if the battery’s
remaining capacity decreases abnormally within
a certain period, this Caution message will
appear. If the same Caution message appears
repeatedly even after changing to a different,
fully-charged Battery Pack LP-E19 or LP-E4N/
LP-E4, there may be a problem with the camera.
Consult your nearest Canon Service Center.
03
Retry operation was
performed for the shutter
charge mechanism. If
this happens repeatedly,
contacting a service
center is recommended. The shutter- and mirror-cocking operation was
not completed normally. If this occurs again, this
Caution message will appear. You can continue
shooting, but if the same message appears
again, consulting your nearest Canon Service
Center is recommended.