Configure network scanning for macintosh, 4configure network scanning for macintosh – Brother ADS-2400N User Manual
Page 90
Prepare Your Network for Scanning with Your Computer
74
4
Configure Network Scanning for Macintosh
4
If you followed the network installation steps in the Quick Setup Guide, your Brother machine was added to
your network automatically. Otherwise, add it to your network using ControlCenter2.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
add or change the address settings from the Control Panel.
1
Click the
(ControlCenter2) icon in the Dock.
The ControlCenter2 window appears.
2
Select Other from the Model pop-up menu.
The Device Selector window appears.
3
Click the + button. The setting window appears.