Brother ADS-2400N - Manual (Page 286)

Troubleshooting
270
10
Cannot find how to
start ControlCenter2
(Macintosh). — To start ControlCenter2, click the
(ControlCenter2) icon in the Dock. If the
(ControlCenter2) icon is not displayed in
the Dock, in the Finder menu bar, click Go >
Applications > Brother, and then double-click
the (ControlCenter2) icon. The
(ControlCenter2) icon appears in the Dock.
Cannot find how to
configure the settings
to scan from the
Control Panel of the
machine.
(ADS-2400N /
ADS-3000N)
— Use Remote Setup. See Set Up the Brother
Machine from Your Computer on page 233.
Cannot save the
settings in Remote
Setup or Web Based
Management.  The machine is processing.
 The machine is being configured
from the machine’s Control Panel.
 Wait until the machine finishes processing and
then try again.
 Stop configuring the machine from the Control
Panel.
Cannot start Remote
Setup.  The machine is turned off.
 The machine is not connected to
your computer.
 An error is occurring.
 The machine is scanning.
 The machine is being configured
from the machine’s Control Panel.
 Turn on the machine, and then try again.
 Connect the machine to your computer, and
then try again.
 Clear all errors, and then try again.
 Wait until scanning has finished and try again.
 Stop configuring the machine from the Control
Panel.
Difficulty Cause Suggestions