Brother ADS-2400N - Manual (Page 242)

Scan Using the Control Panel
226
7
Scan Options Using the Touchscreen
(ADS-2800W / ADS-3600W)
7
Skip Blank Page Function
7
Set Skip Blank Page to On to remove blank pages of the document from the scanning results.
The sensitivity of the Skip Blank Page function can be adjusted with the slider. Moving the slider toward “High”
will make the scanner more likely to skip pages, while moving it toward “Low” will make the scanner less likely
to skip pages.
1
Swipe left or right to display the Scan-to action you want (to PC, to Network, to FTP/SFTP,
to E-mail Server, to SharePoint, to USB).
2
Press Options.
3
Press Skip Blank Page.
4
Press On (or Off).
Adjust the Scanning Position
7
You can adjust the position at which documents are scanned if the output position of images shifts or if
images are squeezed together or stretched out vertically.
1
Swipe left or right to display the scan-to action you want (to Network, to FTP/SFTP, to E-mail Server,
to SharePoint, to USB).
2
Press Options.
3
Press Advanced Settings.
4
Press Margin Settings.
5
Select -3 to 3.
6
Press OK.