Brother ADS-2400N - Manual (Page 258)

Routine Maintenance
242
9
NOTE
For ADS-2800W and ADS-3600W only
When Scheduled Maintenance alert appears on the machine’s LCD, you must clean the machine
promptly. If you do not, document jams and paper feed problems may occur.
Clean the glass strips with a lint-free cloth. When finished, run your fingertip over the glass to see if you
feel anything on it. If you feel dirt or debris, clean the glass again, concentrating on that area. You may
have to repeat the cleaning process three or four times. To test, scan a document after each cleaning
attempt.
When there is a spot of dirt or
correction fluid on the glass
strip the scanned sample
shows a vertical line. After the glass strip is cleaned
the vertical line is gone.