Brother ADS-2400N - Manual (Page 269)

Routine Maintenance
253
9
4
Slide the new Reverse Roller a into the opening on the left and place it into the machine.
5
Close the Reverse Roller Cover.
6
Close the Front Cover.
7
Reset the Reverse Roller Counter (see Reset the Usage Counters on page 254).
NOTE
Confirm the following:
• The Reverse Roller Count value is 0 (see Check Supplies Replacement Cycle (ADS-2400N /
ADS-3000N) on page 245).
• The error message telling you to replace the Reverse Roller on the Status Monitor has been cleared.
• The Touchscreen or LED indications do not display either a Replace Roller or Replace Parts message.
1