Brother ADS-2400N - Manual (Page 233)

Scan Using the Control Panel
217
7
7
Change the settings.
The following settings can be changed.
1 Depending upon the condition of the original document, this function may not work properly.
Setting Description Applicable Feature
Image OCR
E-mail File Print
Auto Deskew Corrects the skew (less than 0.36 in. (9 mm) from the
center of the document to the edge) of the scanned
data.
1
Yes Yes Yes Yes Yes
Auto Image
Rotation Changes the direction of the document based on the
text orientation.
1
Yes Yes Yes Yes Yes
Remove
Bleed-
through /
Pattern/
Remove
Background
Color Prevents bleedthrough on a two-sided document, and
also allows you to remove the base color of documents,
such as newspapers, to make the scanned data more
recognizable.
1
The sensitivity of the Remove Bleed-through / Pattern /
Remove Background Color function can be adjusted with
the sliders. Moving the slider toward “High” will make the
scanner more likely to Remove Bleed-through / Pattern /
Remove Background Color, while moving it toward “Low”
will make the scanner less likely to Remove Bleed-
through / Pattern / Remove Background Color.
Yes Yes Yes Yes Yes
Skip Blank
Page Removes blank pages of the document from the
scanning results.
1
Yes Yes Yes Yes Yes
Multifeed
Detection Uses a ultrasonic sensor to detect when a multifeed has
occurred. When this function detects a multifeed,
confirm that the data scanned before the multifeed has
been saved, and then start scanning again at the next
page or the beginning of the document. Yes Yes Yes Yes Yes
Display
Scanning
Results Shows the numbers of total pages saved and blank
pages skipped on your computer screen. Yes Yes Yes Yes Yes
less than 9 mm
center of the
document
document
right edge of the
paper feed tray left edge of the
paper feed tray center of the
transport path
Scanning
direction