Change a scan button’s default settings, Scan using the carrier sheet, 6change a scan button’s default settings – Brother ADS-2400N User Manual
Page 109
Scan Using Your Computer
93
6
Change a Scan Button’s Default Settings
6
1
Right-click the button that you want to configure and click Button settings. The settings dialog box
appears.
2
Configure the settings as needed.
3
Click OK. The new settings will be used as the default settings.
Scan Using the Carrier Sheet
6
1
Load your document into the Carrier Sheet and load the Carrier Sheet into your machine (see Receipts,
Clippings, Photos, and Other Documents on page 67).
NOTE
Load only one Carrier Sheet at a time.
2
Click the
(ControlCenter4) icon in the task tray and select Open from the menu.
The ControlCenter4 window appears.
3
Select the Scan tab.