Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 9)

LSI Corporation
- 9 -
StorCLI Reference Manual
January 2013
Chapter 3: StorCLI Command Syntax
The StorCLI tool supports the following verbs.
 <[adverb | attributes | properties] > – Specifies what the verb modifies or displays.
 <[key=value]> – Specifies a value, if a value is required by the command.
Table 2 Verbs in the StorCli Command Syntax
Verbs Description
add This verb adds virtual drives, JBODs, and so on to the object identifier.
del This verb deletes a drive, value, or property of the object identifier.
set This verb sets a value of the object identifier.
show This verb shows the value and properties of the object identifier.
pause This verb pauses an ongoing operation.
resume This verb resumes paused operation.
suspend This verb suspends an ongoing operation. A suspended operation cannot be resumed.
compare This verb compares an input value with a system value.
download This verb downloads and flashes a file to the target.
start This verb starts an operation.
flush This verb flushes a controller cache or a drive cache.
stop This verb stops an operation that is in progress. A stopped process cannot be resumed.
import This verb imports the foreign configuration into the drive.
expand This verb expands the size of the virtual drive.