Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 30)

LSI Corporation
- 30 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
Virtual Drives Commands
storcli /cx/[ex]/sx delete hotsparedrive
This command deletes a hot spare drive.
Input example:
storcli /c0/e3/s4,5 delete hotsparedrive
4.3.13 Drive Security Commands
The Storage Command Line Tool supports the following drive security command:
storcli /cx[/ex]/sx show securitykey keyid
storcli /cx[/ex]/sx show securitykey keyid
This command shows the security key for secured physical drives.
Input example:
storcli /c0/e252/s1 show SecurityKey keyid
4.4 Virtual Drives Commands
The Storage Command Line Tool supports the following virtual drive commands. The following table describes
frequently used virtual drive commands.
4.4.1 Add Virtual Drives Commands
The Storage Command Line Tool supports the following commands to add virtual drives:
storcli /cx add vd type=raid[0|1|5|6|10|50|60][Size=,,..|*all]
[name=,..] drives=e:s|e:s-x|e:s-x,y;e:s-x,y,z [PDperArray=x][SED]
[pdcache=on|off|*default][pi] [DimmerSwitch(ds)=default|automatic(auto)|
*none|maximum(max)|MaximumWithoutCaching(maxnocache)][cachevd]
[wt|*wb] [nora|*ra] [*direct|cached] [CachedBadBBU|*NoCachedBadBBU]
[Strip=<8|16|32|64|128|256|1024>] [AfterVd=X] [Spares = [e:]s|[e:]s-x|[e:]s-x,y]
[force]
Table 13 Virtual Drives Commands Quick Reference Table
Commands Value Range Description
add See Table 14 and Table 15 Creates virtual drives.
delete cc or cachecade: Deletes CacheCade® virtual drives.
force : Deletes the virtual drive where operating system is present.
Deletes a virtual drive.
set See Table 14 , Table 15 , and Section 4.4.5 , Change Virtual Drive Properties
Commands
Sets virtual drive properties.
show all : Shows all properties of the virtual drive.
cc : Shows properties of CacheCade virtual drives.
See Section 4.4.3 , Virtual Drive Show Commands .
Shows virtual drive information.