Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 10)

LSI Corporation
- 10 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
System Commands
Chapter 4: Working with the Storage Command Line Tool
This chapter describes the commands supported by the Storage Command Line Tool.
4.1 System Commands
4.1.1 System Show Commands
The Storage Command Line Tool supports the following system show commands:
storcli show
storcli show all
storcli show ctrlcount
storcli show help
storcli -v
The detailed description for each command follows.
storcli show
This command shows a summary of controller and controller-associated information for the system. The summary
includes the number of controllers, the host name, the operating system information, and the overview of
existing configuration.
storcli show all
This command shows the list of controllers and controller-associated information, information about the drives that
need attention, and advanced software options.
storcli show ctrlcount
This command shows the number of controllers detected in the server.
storcli show help
This command shows help for all commands at the server level.
storcli -v
This command shows the version of the Storage Command Line Tool.
NOTE The Storage Command Line Tool is not case sensitive.
CAUTION The order in which you specify the command options should be the same as in the User Guide;
otherwise, the command will fail.
NOTE The Storage Command Line Tool does not support the Snapshot feature.