Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 6)

LSI Corporation
- 6 -
StorCLI Reference Manual
January 2013
Chapter 2: Installation
Installing StorCLI on Microsoft Windows Operating Systems
Chapter 2: Installation
The MegaRAID controllers can be used with the following operating systems for Intel and AMD 32-bit and 64-bit
x86-based motherboards:
 Microsoft® Windows® Server 2008 R2
 Microsoft Windows 7 (32/64 bit)
 Red Hat® Enterprise Linux® 5.8 (32/64 bit)
 Red Hat Enterprise Linux 6.1
 Red Hat Enterprise Linux 6.2 (32/64 bit)
 SUSE® Linux Enterprise Server 11 SP2 (32/64 bit)
 SUSE Linux Enterprise Server 10 SP4 (32/64 bit)
 Fedora Core Linux 15
 VMware® ESX 4.0
 VMware ESX 4.1 U2
 VMware ESXi 4.1 U2
 VMware ESXi 5.0 U1
 Solaris
 FreeBSD
 EFI
2.1 Installing StorCLI on Microsoft Windows Operating Systems
The Windows StorCLI binary is provided in a binary format, and no separate installation is required.
1. Copy the binary file from the CD or from the LSI website.
2. Place the binary file in the directory from which you want to run the Storage Command Line Tool, and run
the tool.
2.2 Installing StorCLI on Linux Operating Systems
To install StorCLI on Linux operating systems, perform the following steps:
1. Unzip the StorCLI package.
2. To install the StorCLI RPM, run the rpm -ivh command.
3. To upgrade the StorCLI RPM, run the rpm -Uvh command.
NOTE The LSISAS2208 and LSISAS2108 controllers provide support for Microsoft Windows 8 and Microsoft
Windows Server 2012 operating systems.
NOTE StorCLI must be run with the administrator privileges.