Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 20)

LSI Corporation
- 20 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
Controller Commands
storcli /cx set advancedsoftwareoptions(aso) key=<value> [preview] | [deactivatetrialkey]
[rehostcomplete][transfertovault]
This command activates advanced software options (ASO) for a controller. You can use the following options with the
advanced software options command.
Input example:
storcli /c0 set Aso key=LSI0000
storcli /cx show safeid
This command shows the Safe ID of the specified controller.
Input example:
storcli /c0 show safeid
4.2.5 Controller Security Commands
The Storage Command Line Tool supports the following controller security commands:
storcli /cx compare securitykey=ssssss
storcli /cx delete securitykey
storcli /cx set securitykey keyid=kkkk
storcli /cx set securitykey=sssss [passphrase=sssss][keyid=sssss]
storcli /cx set securitykey=sssss oldsecuritykey=ssss [passphrase=sssss]
[keyid=sssss]
The detailed description for each command follows.
storcli /cx compare securitykey=ssssss
This command compares and verifies the security key of the controller.
storcli /cx delete securitykey
This command deletes the security key of the controller.
Input example:
storcli /c0 delete securitykey
storcli /cx set securitykey keyId=kkkk
This command sets the key ID for the controller. The key ID is unique for every controller.
Table 7 Set Advanced Software Options Input Options
Option Value Range Description
key 40 alpha numeric characters. Key to activate ASO on the controller.
NOTE After they are activated, ASOs cannot be removed from the controller.
deactivatetrialkey — Deactivates the trial key applied on the specified controller.
rehostcomplete — Enables rehosting on the specified controller.
transfertovault — Transfers the ASO key to the vault and disables the ASO.