Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 67)

LSI Corporation
- 67 -
StorCLI Reference Manual
January 2013
Appendix B: MegaCLI Commands to StorCLI Command Conversion
Stop a running patrol read. MegaCli -AdpPR -Stop
-aN|-a0,1,2|-aALL
storcli /cx stop patrolRead
Include SSD drives in patrol read. MegaCli -AdpPR -SSDPatrolReadEnbl
-aN|-a0,1,2|-aALL
storcli /cx set patrolRead
includessds=on | onlymixed
Exclude SSD drives in patrol read. MegaCli -AdpPR -SSDPatrolReadDsbl
-aN|-a0,1,2|-aALL
storcli /cx set patrolRead
includessds=off
Delay a patrol read, MegaCli -AdpPR -SetDelay Val
-aN|-a0,1,2|-aALL
storcli /cx set patrolread
delay=<value>
Schedule a patrol read. MegaCli -AdpPR -SetStartTime
yyyymmdd hh -aN|-a0,1,2|-aALL storcli /cx set patrolread=on
starttime=YYYY/MM/DD HH
Set the value for maximum
concurrent physical drives for the
patrol read. MegaCli -AdpPR -maxConcurrentPD Val
-aN|-a0,1,2|-aALL storcli /cx set patrolread
maxconcurrentpd=xx
Table 14 Consistency Check Commands
Description MegaCLI Command StorCLI Command
Schedule a consistency check. MegaCLI -AdpCcSched -Dsbl|-Info|
{-ModeConc | -ModeSeq [-ExcludeLD
-LN|-L0,1,2] [-SetStartTime yyyymmdd
hh ] [-SetDelay val ] }
-aN|-a0,1,2|-aALL
storcli /cx set
consistencycheck|cc=[off|seq|conc]
[delay=value] starttime=yyyy/mm/dd
hh [excludevd=x-y,z]
Show consistency check status and
consistency parameters, in progress,
if any. MegaCLI -AdpCcSched -Info storcli /cx show cc/ConsistencyCheck
Table 15 OPROM BIOS Commands
Description MegaCLI Command StorCLI Command
Schedule a consistency check. MegaCli -AdpBIOS -Dsply
-aN|-a0,1,2|-aALL
storcli /cx show bios
Show consistency check status and
consistency parameters, if any in
progress. MegaCli -AdpBootDrive -{-Set {-Lx |
-physdrv[E0:S0]}} -aN|-a0,1,2|-aALL storcli /cx/ex/sx set
bootdrive=on|off
storcli /cx/vx set bootdrive=on|off
Sets the BIOS properties for the
controller. MegaCli -AdpBIOS -Enbl | -Dsbl |
-Dsply | SOE | BE
EnblAutoSelectBootLd |
DsblAutoSelectBootLd
-aN|-a0,1,2|-aALL
storcli /cx set bios=
storcli /cx set
stoponerror|soe=
storcli /cx set
autobootselect(abs)=
Table 13 Patrol Read Commands (Continued)
Description MegaCLI Command StorCLI Command