Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 70)

LSI Corporation
- 70 -
StorCLI Reference Manual
January 2013
Appendix B: MegaCLI Commands to StorCLI Command Conversion
Delete a virtual drive hosting the
operating system. MegaCLI -CfgLdDel
-LX|-L0,2,5...|-LALL [-Force]
-aN|-a0,1,2|-aALL
storcli /cx/vx[all] delete -force
Delete a CacheCade virtual drive. MegaCLI -CfgCacheCadeDel
-LX|-L0,2,5...|-LALL
-aN|-a0,1,2|-Aall
storcli /cx/vx[all] delete
CacheCade(cc)
Show, delete, and import the foreign
configuration commands. MegaCli –CfgForeign –Scan |
{-Preview | –Dsply| -Import |
-Clear[FID]} -aN|-a0,1,2|-aALL"
storcli /cx/f(x|all) show [all]
[securityKey=xxx]
storcli /cx/f(x|all) del|delete
[securityKey=xxx]
storcli /cx/f(x|all) import
[preview] [securityKey=xxx]"
Table 18 Security Commands
Set the key ID for the controller. MegaCli -CreateSecurityKey
-SecurityKey sssssssssss |
[-Passphrase sssssssssss] |
[-KeyID kkkkkkkkkkk] -aN
storcli /cx set SecurityKey=XXXXXX
[passphrase=yyyyy] [keyId=zzzz]
Change the security key for the
controller. MegaCli -ChangeSecurityKey
-OldSecurityKey sssssssssss |
-SecurityKey sssssssssss|
[-Passphrase sssssssssss] |
[-KeyID kkkkkkkkkkk] -aN
storcli /cx set SecurityKey=XXXXXX
OldSecurityKey=yyyyy
Compare and verify the security key
for the controller. MegaCli -VerifySecurityKey
-SecurityKey sssssssssss -aN
storcli /cx compare
SecurityKey=xxxxxx
Delete the security key. MegaCLI -DestroySecurityKey |
[-Force] -aN
storcli /cx delete SecurityKey
Set the security key for the controller. MegaCli -SetKeyID -KeyID kkkkkkkkkkk
-aN
storcli /cx set SecurityKey
KeyId=xxxx
Table 17 RAID Configuration Commands (Continued)