Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 60)

LSI Corporation
- 60 -
StorCLI Reference Manual
January 2013
Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
Table 7 Physical Drive Commands
Description 3Ware CLI Command StorCLI Command
Show physical disk information. /cx/px show [all] /cx[/ex]/sx show [all]
Start, stop, suspend, or resume an
ongoing rebuild operation. /cx/ux start rebuild disk=
[ignoreECC]
NOTE Rebuilds cannot be stopped or paused.
/cx[/ex]/sx start rebuild
/cx[/ex]/sx stop rebuild
/cx[/ex]/sx pause rebuild
/cx[/ex]/sx resume rebuild
Mark the configured physical disk
drive as missing for the selected
adapter. /cx/px remove [quiet] /cx[/ex]/sx set missing
Change the physical disk drive state
to offline. /cx/px remove [quiet] /cx[/ex]/sx set offline
Add jbod. /cx add vd type=jbod disk=<p>
(where p = port or drive number)
/cx[/ex]/sx set jbod
Change the physical disk drive hot
spare state and associate the drive to
an enclosure and virtual disk. /cx add vd type=spare
disk=<p:p|p-p|p:p-p>
(where p = port or drive number)
/cx[/ex]/sx add hotsparedrive
[{dgs=n,,>]
[EnclAffinity][nonRevertible]
Locate the physical disk drive and
activate the physical disk activity LED. /cx/px set identify=on|off /cx[/ex]/sx start | stop locate
Prepare the unconfigured physical
drive for removal. /cx/px remove [quiet] /cx[/ex]/sx spindown
Show information about all physical
disk drives and other devices
connected to the selected adapters;
includes drive type, size, serial
number, and firmware version. /cx/px show [all] /cx/eall/sall show [all]
Download drive or expander
firmware. /cx/px update fw=image.name [force] /cx[/ex]/sx download src=filepath
[satabridge]
Table 8 Enclosure Commands
Description 3Ware CLI Command StorCLI Command
Show information about the
enclosure for the selected adapter. /cx/ex show [all] /cx/ex show [all]
Show the status of the enclosure
connected to the selected adapter. /cx/ex show [all]
/cx/ex show controllers
/cx/ex show slots
/cx/ex show fans
/cx/ex show temp
/cx/ex show pwrs
/cx/ex show alms
/cx/ex show status
Download enclosure firmware. /cx/ex update fw=image.name [force] /cx/ex download src=filepath
[offline] [forceActivate