Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 39)

LSI Corporation
- 39 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
Virtual Drives Commands
4.4.10 Background Initialization Commands
The Storage Command Line Tool supports the following commands for background initialization:
storcli /cx/vx resume bgi
storcli /cx/vx set autobgi=
storcli /cx/vx show autobgi
storcli /cx/vx show bgi
storcli /cx/vx stop bgi
storcli /cx/vx suspend bgi
The detailed description for each command follows.
storcli /cx/vx resume bgi
This command resumes a suspended background initialization operation.
Input example:
storcli /c0/v0 resume bgi
storcli /cx/vx set autobgi=<on|off>
This command sets the auto background initialization setting for a virtual drive to on or off.
Input example:
storcli /c0/v0 set autobgi=on
storcli /cx/vx show autobgi
This command shows the background initialization setting for a virtual drive.
Input example:
storcli /c0/v0 show autobgi
storcli /cx/vx show bgi
This command shows the background initialization progress on the specified virtual drive in percentage.
Input example:
storcli /c0/v0 show bgi
storcli /cx/vx stop bgi
This command stops a background initialization operation. You can run this command only for a virtual drive that is
currently initialized.
Input example:
storcli /c0/v4 stop bgi
NOTE You cannot resume a stopped consistency check process.