Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 25)

LSI Corporation
- 25 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
Drive Commands
storcli /cx[/ex]/sx stop initialization
This command stops an initialization process running on the specified drive. A stopped initialization process cannot
be resumed.
Input example:
storcli /c0/e56/s1 stop initialization
4.3.5 Drive Firmware Download Commands
The Storage Command Line Tool supports the following command to download drive firmware:
storcli /cx[/ex]/sx download src=filepath [satabridge]
This command flashes the firmware with the specified file. The satabridge option lets you download the SATA
bridge firmware in online mode.
Input example:
storcli /c0/e56/s1 download src=c:\file1.bin
4.3.6 Locate Drives Commands
The Storage Command Line Tool supports the following commands to locate a drive and activate the physical disk
activity LED:
storcli /cx[/ex]/sx start locate
storcli /cx[/ex]/sx stop locate
The detailed description for each command follows.
storcli /cx[/ex]/sx start locate
This command locates a drive and activates the drive’s LED.
Input example:
storcli /c0/e56/s1 start locate
storcli /cx[/ex]/sx stop locate
This command stops a locate operation and deactivates the drive’s LED.
Input example:
storcli /c0/e56/s1 stop locate
4.3.7 Prepare to Remove Drives Commands
The Storage CLI supports the following commands to prepare the physical drive for removal:
storcli /cx[/ex]/sx spindown
storcli /cx[/ex]/sx spinup
The detailed description for each command follows.