Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 61)

LSI Corporation
- 61 -
StorCLI Reference Manual
January 2013
Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
Table 9 Events and Logs
Description 3Ware CLI Command StorCLI Command
Show the total number of events,
newest and oldest sequence number,
shutdown sequence number, reboot
sequence number, clear sequence
number. /cx show alarms
NOTE This command shows AENs since last
controller reset.
/cx show eventloginfo
Show the total event entries available
at the firmware since last clear, and
details of each entries of error log. /cx show alarms
NOTE This command shows AENs since last
controller reset.
/cx show events filter=warning| critical| fatal >
file=<path of the file>
Show the count of events starting
from specified seqNum and
matching category and severity /cx show alarms
NOTE This command shows AENs since last
controller reset.
/cx show events type=| sinceReboot |ccincon vd=<0,1,2…>
| includeDeleted | latest=x
filter=fatal > file=<path of the file>
Show TTY firmware terminal log
entries with details on given
adapters. The information is shown as
total number of entries available on
the firmware side. /cx show diag /cx show TermLog
[type=contents|Config]
Table 10 Miscellaneous Commands
Description 3Ware CLI Command StorCLI Command
Show version information. tw_cli ? ver
Show help for all show commands at
server level. tw_cli ?
tw_cli /cx ?
tw_cli /cx/ux ?
tw_cli /cx/px ?
tw_cli /cx/phyx ?
tw_cli /cx/bbu ?
tw_cli /cx/ex ?
tw_cli /ex
NOTE 3 Ware CLI shows context sensitive help.
show help
Show PHY connection information
for physical PHY medium on the
adapters. /cx/phyx show /cx/px show
Set PHY link speed. /cx/phyx set
link=<0|1.5|3.0|6.0|12.0> /cx/px set
linkspeed=0(auto)|1.5|3|6|12