Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 56)

LSI Corporation
- 56 -
StorCLI Reference Manual
January 2013
Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
Table 3 Alarm Commands
Description 3Ware CLI Command StorCLI Command
Set alarm properties. /cx/ex/almx set
alarm=
NOTE The 3ware® controllers have enclosure alarms.
/cx set alarm=
NOTE The StorCLI controllers have controller alarms.
Show alarm properties. /cx/ex show alarms
NOTE This command applies for only 9750 and
9690SA controllers.
/cx show alarm
Table 4 Patrol Read and Consistency Check Commands
Description 3Ware CLI Command StorCLI Command
Show patrol read status and patrol
read parameters, if any in progress. /cx/ux show /cx show patrolRead
Set the patrol read options on a
single adapter, multiple adapters, or
all adapters (x = single controller). /cx/ux start verify
/cx/ux set autoverify=
/cx add verify=dddh:hh:duration
/cx set patrolread {=on
mode=}|{off}
/cx set patrolread [starttime=<
yyyy/mm/dd hh>]
[maxconcurrentpd=<value>]
[includessds=]
[uncfgareas=on|off]
/cx set patrolread delay=<value>
Show consistency check status, if any
in progress, and consistency check
parameters. /cx/ux show /cx/vx show cc
/cx show ccrate
Set consistency check options on a
single adapter, multiple adapters, or
all adapters (x = single controller). /cx/ux start verify
/cx/ux set autoverify=
/cx add verify=ddd:hh:duration
storcli /cx set
consistencycheck|cc=[off|seq|conc]
[delay=value]
[starttime=yyyy/mm/dd hh]
[excludevd=x-y,z]
NOTE The 3Ware CLI combines both patrol read and consistency check into a single command. The StorCLI
has different commands for each.