Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 5)

LSI Corporation
- 5 -
StorCLI Reference Manual
January 2013
Chapter 1: Introduction
Overview
Chapter 1: Introduction
1.1 Overview
The Storage Command Line Tool (StorCLI) is the command line management software designed for the MegaRAID®
product line. The StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to script.
This document is the reference manual for installing and using the Storage Command Line Tool, and it explains the
various features of the Storage Command Line Tool.
1.2 Support for MegaCLI Commands
The MegaCLI commands can be executed on the Storage Command Line (StorCLI) tool. A single binary is output for
the StorCLI commands and its equivalent MegaCLI commands. See Appendix
B , MegaCLI Commands to StorCLI
Command Conversion , for the information for conversion from MegaCLI commands to StorCLI commands.
1.3 Devices Supported by the StorCLI Tool
The StorCLI tool is designed to work with the MegaRAID product line. The StorCLI tool supports the following
MegaRAID products.
 The 926x product line.
 The 928x product line.
 The 924x product line.
 LSI® MegaRAID SAS iMR
 LSI MegaRAID SAS 9280-8e
 LSI MegaRAID SAS 9260CV-8i
 LSI MegaRAID SAS 9266CV-8i
 LSI MegaRAID SAS 9285-8e
NOTE The legacy commands are deprecated from this guide.