Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 58)

LSI Corporation
- 58 -
StorCLI Reference Manual
January 2013
Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
Show drive group information. /cx/ux show [all]
NOTE Information of each unit is shown individually.
/cx/dall show [cachecade]
Scan and show available foreign
configurations, provide a preview of
the imported foreign configuration,
show or import foreign
configuration. /cx rescan cx/fx[all] show [preview]
[ securityKey=sssssssssss ]
cx/fx[all] import [ securityKey=sssssssssss ]
Show VD information, including
name, RAID level, RAID level qualifier,
size in MBs, state, strip size, number
of drives, span depth, cache policy,
access policy, and any ongoing
activity progress, which includes
initialization, background
initialization, consistency check, and
reconstruction. /cx/ux show [all] /cx/vx show all
Show the virtual drive properties. /cx/ux show autoverify
/cx/ux show identify
/cx/ux show ignoreECC
/cx/ux show initializestatus
/cx/ux show name
/cx/ux show parit
/cx/ux show qpolicy
/cx/ux show rapidrecovery
/cx/ux show rdcache
/cx/ux show rebuildstatus
/cx/ux show serial
/cx/ux show status
/cx/ux show storsave
/cx/ux show verifystatus
/cx/ux show volumes
/cx/ux show wrcache
/cx/vx show all
NOTE The StorCLI does not have commands to
show individual virtual drive properties.
Set virtual drive properties. /cx/ux set autoverify=on|off
/cx/ux set cache=on|off [quiet]
/cx/ux set identify=on|off
/cx/ux set ignoreECC=on|off
/cx/ux set name=string
/cx/ux set qpolicy=on|off
/cx/ux set
rapidrecovery=all|rebuild|disable
/cx/ux set
rdcache=basic|intelligent|off
/cx/ux set
storsave=protect|balance|perform
[quiet]
/cx/ux set wrcache=on|off [quiet]
/cx/vx set
accesspolicy=rmvblkd>
/cx/vx set cachedbadbbu=
/cx/vx set iopolicy=
/cx/vx set name=
/cx/vx set pdcache=
/cx/vx set rdcache=
/cx/vx set security=
/cx/vx|vall set ssdcaching=
/cx/vx set wrcache=
Table 6 Virtual Drive Commands (Continued)
Description 3Ware CLI Command StorCLI Command