Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 41)

LSI Corporation
- 41 -
StorCLI Reference Manual
January 2013
Chapter 4: Working with the Storage Command Line Tool
BIOS-Related Commands
storcli /cx/fx|fall import [preview] [ securitykey=sssssssssss ]
This command imports the foreign configurations of a controller. The preview option shows a summary of the
foreign configuration before importing it.
Input example:
storcli /c0/fall import
storcli /cx/fx|fall show [all][ securitykey=sssssssssss ]
This command shows the summary of the entire foreign configuration for a particular controller. The all option
shows all the information of the entire foreign configuration.
Input example:
storcli /c0/fall show preview foreign
storcli /c0/fall import preview
storcli /c0/fall show all
4.6 BIOS-Related Commands
The Storage Command Line Tool supports the following BIOS commands:
storcli /cx autobootselect(abs)=<on|off>
storcli /cx set bios=<on|off>
storcli /cx set headlessafemode|hsm=
storcli /cx set headlesscontinueonerror|hcoe=
storcli /cx set stoponerror|soe=<on|off>
storcli /cx show bios
The detailed description for each command follows.
storcli /cx set autobootselect|abs=<on|off>
This command enables the BIOS to select the best logical drive as the boot drive.
Input example:
storcli /cx set autobootselect=on
storcli /cx set bios=<on|off>
This commands enables or disables the MegaRAID controller's BIOS.
Input example:
storcli /c0 set bios=enable
NOTE The EID:Slot column is populated for the foreign PDs that are locked.
NOTE The legacy BIOS can load a limited number of the PCI device's BIOS. Disable the MegaRAID BIOS to
avoid issues during POST.