TA Triumph-Adler P-C2660 MFP - Manual (Page 90)

Preparation before Use
2-48
Loading Paper in the Cassettes
The standard cassette 1 will hold plain paper, recycled paper or color paper.
The standard cassette holds up to 250 sheets of Legal or smaller plain paper (80 g/m
2
).
The following paper sizes are supported: A4, A5, A6, B5, Legal, Letter, Other (Folio, Oficio II, Executive,
Statement, ISO B5, 16K, 216x340mm and Envelope C5)
IMPORTANT:
• You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may
cause paper jams or other faults.)
• When using media types other than plain paper (such as recycled or colored paper), always specify the
media type setting. (Refer to Specifying Paper Size and Media Type for the Cassette 1 on page 2-57)
The cassettes can hold paper with weights up to 163 g/m
2
.
• Do not load thick paper that is heavier than 163 g/m 2 in the cassettes. Use the multi purpose tray for paper
that is heavier than 163 g/m 2 .
1 Pull the cassette completely out of the machine.
IMPORTANT: When pulling the cassette out of the
machine, ensure it is supported and does not fall out.
2 Turn the Paper Size Dial until the paper size you
are using is visible. The paper size set here is
recognized by the machine.
IMPORTANT: To use a paper size that does not
appear on the paper size dial, set the paper size dial to
"Other". The paper size must also be set from the
operation panel. For details, see Specifying Paper Size
and Media on page 2-57.
3 Adjust the position of the paper width guides
located on the left and right sides of the cassette.