Snmpv3 setting – TA Triumph-Adler P-C2660 MFP User Manual
Page 449
Default Setting (System Menu)
8-193
8
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [Secure Protocol].
6
Press the OK key. Secure Protocol appears.
7
Press the or key to select [POP3 Security 1],
[POP3 Security 2] or [POP3 Security 3].
8
Press the OK key. POP3 Security appears.
9
Press the or key to select [Off], [SSL/TLS] or
[STARTTLS].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
SNMPv3 Setting
Sets up SNMPv3. The default setting is Off. Use the procedure below.
Refer to Protocol Detail on page 8-181 about the procedures.
Network Setting: a b
*********************
2 WSD-SCAN
3 WSD-PRINT
[ Exit
]
1 *TCP/IP Setting
Secure Protocol: a b
4 LDAP Security
5 SMTP Security
*********************
[ Exit
]
6 POP3 Security 1
POP3 Security 1: a b
*********************
2 SSL/TLS
3 STARTTLS
1 *Off