Ipsec setting – TA Triumph-Adler P-C2660 MFP User Manual
Page 450
Default Setting (System Menu)
8-194
IPSec Setting
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off.
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2
The System/Network menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [IPSec].
6
Press the OK key. IPSec appears.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
Network Setting: a b
2 WSD-SCAN
3 WSD-PRINT
*********************
[ Exit
]
4 IPSec
IPSec:
a b
*********************
2 On
1 *Off