Changing device information – TA Triumph-Adler P-C2660 MFP User Manual
Page 81
Preparation before Use
2-39
2
Changing Device Information
Change the device information of the machine.
1
Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on page 2-37.
2
From the Device Settings menu, select System.
3
Enter the device information, and then click Submit.
IMPORTANT:
After changing the setting, restart the network or turn the machine OFF and then ON. To restart
the network interface card, click Reset in the Management Settings menu, and then click Restart Network in
“Restart”.
This manual is related to the following products: