TA Triumph-Adler P-C2660 MFP User Manual
Page 469
Default Setting (System Menu)
8-213
8
Optional interface (Optional interface card setting)
This locks and protects the optional interface slot. The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network].
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2
The System/Network menu appears.
3
Press the or key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu appears.
5
Press the or key to select [Option I/F 1] or
[Option I/F 2].
For P-C2660 MFP, select [Option I/F].
6
Press the OK key. Option I/F appears.
7
Press the or key to select [Unblock] or [Block].
8
Press the OK key. Completed. is displayed and the
screen returns to the System menu.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
I/F Block Set.:
a b
*********************
2 USB Device
3 USB Storage
[ Exit
]
1 USB Host
Option I/F 1:
a b
*********************
2 Block
1 *Unblock