TA Triumph-Adler P-C2660 MFP - Manual (Page 495)

Troubleshooting
10-15
10
Error Code:3101 Is the server operating
correctly? Make sure that the network
environment (server, hub, or other
LAN network) is operating correctly. —
Is an authentication method
set for which the server
cannot respond normally? Check the settings on the server and
client. (For example, make sure the
SMTP/POP authentication enable/
disable settings are the same on the
server and on the client.) —
Error Code:3201 Is a non-supported SMTP
authentication method
enabled? Check the SMTP authentication
settings on the server and client. The
SMTP authentication methods below
can be used on the machine.
CRAM-MD5 / DIGEST-MD5 / PLAIN /
LOGIN —
Error Code:4201,
5101, 5102, 5103, 5104,
7101, 7102, 720f – Turn the main power switch off and
then on. If this occurs repeatedly,
write down the error code that
appears in the message display and
contact a service technician. (See the
procedure in
Machine failure. Call
service. )
—
Error Code:9181 Have more than 999 original
pages been scanned? If there are more than 999 original
pages, send the pages in separate
batches. —
Error Message Checkpoints Corrective Actions
Reference
Page