TA Triumph-Adler P-C2660 MFP - Manual (Page 232)

Document Box
6-18
12 The number of copies screen appears. Set the
number of copies and press the OK key.
13 The file print confirmation screen appears. Press
[Yes] (the Left Select key). Accepted appears and
printing begins.
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is
printed with Quick Copy selected in the printer driver, the document will be simultaneously stored on the SSD.
The required number of copies can be printed whenever needed from the operation panel. If more documents
than the set maximum are stored, the oldest job will be overwritten each time a new job is stored. When the
machine power is turned off, jobs stored in this mode are erased. For the number of documents that can be
stored in Quick Copy mode, see Quick Copy Jobs on page 8-97.
1 Press the Document Box key. The Document Box
menu appears.
2 Press the  or  key to select [Job Box].
3 Press the OK key. The Job Box menu appears.
4 Press the or  key to select [Quick Copy].
5 Press the OK key. The user selection menu
appears.
6 Press the  or  key to select the user.
Copies: a b
(1 - 999,---)
******** copies
---
Document Box: a b
*********************
2 Sub Address Box
3 Polling Box 1 Custom Box
Job Box: a b
*********************
2 Quick Copy 1 Private Print
Quick Copy: a b
*********************
l Maury l Fiala