TA Triumph-Adler P-C2660 MFP User Manual
Page 443
Default Setting (System Menu)
8-187
8
2
The System/Network menu appears.
3
Press the or key to select [Network Setting].
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [Secure Protocol].
6
Press the OK key. Secure Protocol appears.
7
Press the or key to select [IPP Security].
8
Press the OK key. IPP Security appears.
9
Press the or key to select [IPP/IPP over SSL]
or [IPPoverSSL only].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
HTTP Security
Specify the protocol to be used for HTTP. The default setting is HTTPS only.
Use the procedure below to make the setting.
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
Network Setting: a b
*********************
6 Host Name
7 LAN Interface
[ Exit
]
5 Secure Protocol
Secure Protocol: a b
1 SSL
*********************
3 HTTP Security
[ Exit
]
2 IPP Security
IPP Security:
a b
*********************
2 IPPoverSSL only
1 *IPP/IPP over SSL