Sleep timer …8-152 – TA Triumph-Adler P-C2660 MFP User Manual
Page 408
Default Setting (System Menu)
8-152
12
Press the OK key. Completed. is displayed and the
screen returns to the Energy Saver mode.
Sleep Timer
Set the amount of time to wait before Auto Sleep.
Use the procedure below to set the Auto Sleep time. The default setting is 1 minute.
1
In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
4
The Timer Settings menu appears.
5
Press the or key to select [Sleep Timer].
Value
For Europe
1 to 60 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
Sys. Menu/Count.:a b
4 User/Job Account
5 User Property
*********************
[ Exit
]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit
]
1 Language
Login User Name: L
b
*******************
Login Password:
[ Login
]
Timer Setting:
a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit
]
1 Auto Panel Reset