TA Triumph-Adler P-C2660 MFP - Manual (Page 333)

Default Setting (System Menu)
8-77
8
Destination confirmation screen before transmission
You can specify whether or not the destination confirmation screen appears after the Start key is pressed or
after a destination is added or edited before transmission.
The table below shows the available settings.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Send].
2 Press the OK key. The Send menu appears.
3 Press the  or  key to select
[DestinationCheck].
4 Press the OK key. The destination confirmation
menu appears.
5 Press the  or  key to select [Check before
Send] or [Check New Dest.].
Item Detail
Check beforeSend Specify whether or not the destination
confirmation screen appears before
transmission.
Check New Dest. Specify whether or not the destination
confirmation screen appears when the
destination is new.
Sys. Menu/Count.:a b
7 Copy
8 Printer
*********************
[ Exit ]
9 Send
Send: a b
*********************
2 DestinationCheck
3 Default Screen
[ Exit ]
1 Select Key Set.
DestinationCheck:a b
*********************
2 Check New Dest.
[ Exit ]
1 Check beforeSend