Interface block setting, Usb host (usb memory slot setting), Interface block setting -209 – TA Triumph-Adler P-C2660 MFP User Manual
Page 465
Default Setting (System Menu)
8-209
8
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• USB Storage (USB storage setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2
The System/Network menu appears.
3
Press the or key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu
appears.
5
Press the or key to select [USB Host].
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
I/F Block Set.:
a b
*********************
2 USB Device
3 USB Storage
[ Exit
]
1 USB Host