Optional function – TA Triumph-Adler P-C2660 MFP User Manual
Page 544
Appendix-6
Optional Function
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
•
UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
NOTE:
Restrictions such as the number of times the application can be used during the trial period differ
depending on the application.
1
In the Sys. Menu/Count. menu, press the or
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2
The System menu appears.
3
Press the or key to select [Op Function].
4
Press the OK key. The Op Function menu
appears.
5
Press the or key to select desired application.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System
Login User Name: L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit
]
1 Network Setting
Op Function:
a b
*********************
2 UG-33
T
[ Menu
]
1 ID-Card
g