TA Triumph-Adler P-C2660 MFP User Manual
Page 446
Default Setting (System Menu)
8-190
4
Press the OK key. The Network Setting menu
appears.
5
Press the or key to select [Secure Protocol].
6
Press the OK key. Secure Protocol appears.
7
Press the or key to select [LDAP Security].
8
Press the OK key. LDAP Security appears.
9
Press the or key to select [Off], [SSL/TLS] or
[STARTTLS].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
SMTP Security
Select the communication protocol according to the type of security employed by the SMTP server. The default
setting is Off.
The table below shows the available settings.
* You can change the port number using Embedded Web Server RX.
Use the procedure below to make the setting.
Network Setting: a b
*********************
6 Host Name
7 LAN Interface
[ Exit
]
5 Secure Protocol
Secure Protocol: a b
2 IPP Security
3 HTTP Security
*********************
[ Exit
]
4 LDAP Security
LDAP Security:
a b
*********************
2 SSL/TLS
3 STARTTLS
1 *Off
Item
Description
Off
Do not use security employed by the SMTP server.
SSL/TLS
Encryption is applied any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server settings.
Typically, 465* for SSL/TLS is well-known SMTP port.
STARTTLS
Encryption is applied any data communication. Typically, 25* or 587* for
STARTTLS is well-known SMTP port.