Wsd scan setup, Wsd scan setup …8-178 – TA Triumph-Adler P-C2660 MFP User Manual
Page 434
Default Setting (System Menu)
8-178
8
Press the OK key. TCP/IP appears.
9
Press the or key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10
Press the or key to select [Bonjour].
11
Press the OK key. Bonjour appears.
12
Press the or key to select [On] or [Off] and
then press the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
1
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
TCP/IP:
a
b
*********************
2 On
1 *Off
Bonjour:
a
b
1 Off
*********************
2 *On
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]