TA Triumph-Adler DC 2435 - Manual (Page 95)

FAX Operation (Advanced)
4-27
4
Changing/Deleting Settings by Requirement
To change or delete the settings by requirement, follow the steps below.
1 Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2 Select the requirement name to be deleted or
changed.
To delete the requirement name, go to the next
step. To change the requirement name, go to step
4.
3 Press [Delete]. When the confirmation screen is
displayed, press [Yes] and go to step 6.
4 Press [Detail].
5 Refer to steps 5 to 26 of Using Rule for Specific RX
on page 4-22 to change the settings.
6 When the deletion or change is completed, press
[OK].
Raising the Priority of Settings by Requirement
To raise the priority of the settings by requirement, follow the steps below.
1 Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2 Select the requirement name to be reprioritized.
3 Press [Raise Priority].
The priority of the selected requirement is raised.