TA Triumph-Adler DC 2435 - Manual (Page 94)

FAX Operation (Advanced)
4-26
26 Press [Register]. The forwarding settings is
registered.
27 To register another forwarding settings, repeat
steps 4 to 26.
28 To set forwarding of received faxes that do not
meet the conditions, select other, press [Detail],
and change the settings.
NOTE: If other is not selected, received faxes that do
not meet the conditions will be printed.
Save to FAX Box cannot be set in other settings.
29 Select the checkbox beside the forwarding settings
to be enabled from the list. The checkbox beside
the forwarding setting to be enabled is checked.
NOTE: To disable the setting, press the checkbox to
delete the checkmark.
30 Press [OK] to save the settings by each
requirement.