TA Triumph-Adler DC 2435 - Manual (Page 116)

FAX Operation (Advanced)
4-48
Changing/Deleting Registration Contents
You can change program numbers and program names, or delete programs.
1 Press the Program key.
2 Press [Edit] and press the key of the program
number to be changed or deleted (1 to 50).
3 To change the program number, press [Change] of
Program No. Use [+]/[-] or the numeric keys to
change the program number, and press [OK].
To change the program name, press [Change] of
Program Name. Enter the program name, and
press [OK].
4 Press [Register]. When you select [Yes] on the
change confirmation screen, the program is
changed.
To delete registration contents, press [Delete this
Program]. When you press [Yes] on the deletion
confirmation screen, the program is deleted.
Using Program Dial
1 Press the Program key.
2 Place the originals.
3 Press [Recall] and then the key of the program
number to call up (1 to 50). Press [No.] to recall the
program number by direct entry.
NOTE: You can also use the program you have called
up to change transmission requirements such as
changing the other party.
4 Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-12.
No.
Recall Add Edit
10/10/2010 10:10 Status
Eco Copy Confidential Stamp
Send 2 FAX 1
ID Card Copy
FAX 2
Send 1
Box 1
01 02 03 04
05 07 08 06
09 10 11 12
13 15 16 14
17 19 20 18