TA Triumph-Adler DC 2435 - Manual (Page 28)

Preparation Before Use
2-4
Date and Time Entry
Register the date and time of the machine’s built-in clock. Because the FAX delayed transmission is conducted
based on the time registered here, be sure to register the correct date and time.
IMPORTANT: Correct the time displayed on the touch panel of the operation panel regularly. Otherwise, the
time displayed may eventually deviate from the current time.
1 Press the System Menu key.
2 Press [ ], and then [Date/Timer].
The user authentication screen is displayed. Enter
a login user name and password, and press
[Login].
The factory default settings for the login user name
and password are both ‘Admin’.
3 Press [Change] of Time Zone.
4 Select the region and press [OK].
NOTE: Press [ ] or [ ] to view the next region.
5 Press [Off] or [On] of Summer Time and then press
[OK].
NOTE: If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
6 Press [Change] of Date/Time.
7 Enter the date and time using [+]/[-]. Enter the time
by a 24-hour system.
8 Press [OK].
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
Zone
-12:00 International Date Line West
1/13
-11:00 Samoa
-10:00 Hawaii
-09:00 Alaska
-11:00 UTC-11
-08:00 Baja California
Summer Time
Off
On
Status 10/10/2010 10:10
Cancel OK
Date/Timer - Date/Time
Set the date and time.
Off
Day Month Year
Second Minute Hour
2010
10 10 31
10 10
Status 10/10/2010 10:10
Cancel OK